Exchangeable kit ATS MA12/S-7/ESD Item 46236-KIT

Downloads
Conformation of RoHS compliance (EN|PDF)
Document (46236-KIT__Kundenzeichnung.PDF)
Document (INFO_1317.PDF)
Product datasheet (EN|pdf)
Document (46236-KIT_Montage.PDF)
Document (INFO 1317.PDF)
CAD file (INGUN_46236-KIT.STEP)
Choose version
ATS MA12/S-7/ESD (46236-KIT) INGUN SELECTION
ATS MA12/S-7/CRS (108812) ATS MA12/S-7 (45903-KIT) INGUN SELECTION ATS MA12/HF/AL/ESD (154012) ATS MA12/ESD (46250-KIT) ATS MA12/S-7/HF/AL/ESD (154112) ATS MA12 (45904-KIT) INGUN SELECTION ATS MA12/S-7/ESD (46236-KIT) INGUN SELECTION
Here you can optionally configure a new variant:
Technical data
General data
Product group : ATS manual test fixture (MA)
Subseries : ATS MAxx
Series : ATS MA12
Version : ESD with interface, FR4
Version NHP : beschichtet. 10^6 - 10^7 Ohm
Scope of delivery : Unassembled
For tandem fixtures : No
Max. interface signals : 1190
Interface blocks required : Device under test (DUT) side
Max. internal interface blocks : 7
Internal interface : Available
Dual-stage contacting : Yes, with suitable additional option
Double-sided contact : Yes, with suitable additional option
Weight : 5.7 kg
Min. temperature : + 10 °C
Max. temperature : + 60 °C
Low voltage : Yes, with suitable additional option
RoHS-compliant : RoHS-3;6a;6c
Technical data
Pushrod length : 60 mm
Test probe installation height, top : 16 mm
Test probe installation height, bottom : 10.5 mm
Test probe installation height, dual-stage, bottom : 16 mm
Free space above PCB : 58 mm
Useable area (WxD) : 285 x 240 mm
Centring compensation ADP : ± 0.075 mm
Outer dimensionS (WxDxH) : 350 x 313 x 203 mm
Compatible with
Manual test fixtures (MA) : MA x112, MA x212

Board marker probes

Board marker probe   ME-P-F1,0-16-054-QS4 Item 29483
  • Kompakte, robuste Bauweise
  • Precise, adjustable positioning
  • Permanent marking of various materials
  • Outstanding service life, highly resistant to wear
  • Pneumatic drive system
INGUN SELECTION ME-E-R2,0-08-053-2S-BL6V-42V
Board marker probe   ME-E-R2,0-08-053-2S-BL6V-42V Item 107376
  • Short, compact design
  • Marking tip with a new dual scratching engraver
  • Precise, adjustable positioning
  • Quick-exchange engraving unit
  • Operating voltage from 6 V to 42 V
  • Permanent marking of various materials
  • Outstanding service life, highly resistant to wear
  • Typical extraction force from receptacle: 3 N to 9.5 N
Board marker probe   ME-E-R2,0-12-080-S12V Item 38371
  • Kompakte, robuste Bauweise
  • Precise, adjustable positioning
  • Permanent marking of various materials
  • Outstanding service life, highly resistant to wear
  • Electric drive system
Board marker probe   ME-E-S2,0-12-060-K12V Item 25251
  • Kompakte, robuste Bauweise
  • Precise, adjustable positioning
  • Permanent marking of various materials
  • Outstanding service life, highly resistant to wear
  • Electric drive system
INGUN SELECTION ME-P-S2,0-16-054-QS4
Board marker probe   ME-P-S2,0-16-054-QS4 Item 25241
  • Kompakte, robuste Bauweise
  • Precise, adjustable positioning
  • Permanent marking of various materials
  • Outstanding service life, highly resistant to wear
  • Pneumatic drive system
INGUN SELECTION ME-E-R2,0-12-100-K12V
Board marker probe   ME-E-R2,0-12-100-K12V Item 24456
  • Kompakte, robuste Bauweise
  • Precise, adjustable positioning
  • Permanent marking of various materials
  • Outstanding service life, highly resistant to wear
  • Electric drive system

Functional units

Shock-proof plate FB-BSP-ATSMA12 Item 41812
  • Upgrade kits to make operation easier, increase the testing reliability, and to reduce handling times
  • Available for manual test fixtures and exchangeable kits
  • Wide range of varying functions
Rigid pin unit SNK-226-204-ATSMA12 Item 108791-KIT
  • Rigid pin units for reliable contacting in small grids, compatible with INGUN exchangeable kits for modular expansion
  • Available for all standard exchangeable kits ATS MAxx
  • Quick, easy mounting on moving plate
  • Free overall height above the printed circuit board of 8 mm
  • FR4 precision plates ground to a smooth finish
S-Line assembly kit, bottom SBU-285-230-WL-ATSMA12 Item 113151
  • Precise, reliable contacting in small grids
  • Quick, easy installation
  • Extensive, detailed customisation guidelines
  • Plate material is deflection-resistant FR4
Lifting unit FB-AHE-ATSMAxx Item 42741
  • Automatic lifting of tested PC-Boards when opening the test fixture
  • Reduction of process time – One Piece Flow
  • Reduced mixing up of PC-Boards which are already tested and the ones which still have to be tested
  • Increased ease of use
  • Allowed PCB tolerance (length / width): + 0.5 / - 0.2 mm
Rigid pin cover SNH-226-204-ATSMA12 Item 108795-KIT
  • Expansion kit for rigid pin units
  • Available for all standard exchangeable kits ATS MAxx
  • Quick, easy mounting on pressure frame plate
  • Free overall height above the printed circuit board of 58 mm
Dual-stage upgrade kit FB-2SN-ATSMAxx Item 48266
  • Upgrade kits to make operation easier, increase the testing reliability, and to reduce handling times
  • Available for manual test fixtures and exchangeable kits
  • Wide range of varying functions
Detection - contacted FB-ABF-K-S-ATSMAxx Item 33510
  • Upgrade kits to make operation easier, increase the testing reliability, and to reduce handling times
  • Available for manual test fixtures and exchangeable kits
  • Wide range of varying functions
INGUN SELECTION FB-ABF-G-GKS-ATSMAxx
Detection - closed FB-ABF-G-GKS-ATSMAxx Item 46396
  • Upgrade kits to make operation easier, increase the testing reliability, and to reduce handling times
  • Available for manual test fixtures and exchangeable kits
  • Wide range of varying functions
Reinforcement set FB-VSL-KIT-KTE-ATSMA12 Item 45719
  • To be installed under the probe plate (KTP)
  • Recommended for customisations with more than 300 test probes or a force greater than 500 N
  • The scope of delivery includes one strip with fixing material in each case
Top contacting unit FB-ZSK-ATSMA/VA Item 22652-KIT
  • Upgrade kits to make operation easier, increase the testing reliability, and to reduce handling times
  • Available for manual test fixtures and exchangeable kits
  • Wide range of varying functions
Insert blocker FB-ELS-22-ATSMAxx Item 47730
  • Upgrade kits to make operation easier, increase the testing reliability, and to reduce handling times
  • Available for manual test fixtures and exchangeable kits
  • Wide range of varying functions
Top contacting unit ESD FB-ZSK-ESD-ATSMA/VA Item 45704-KIT
  • Upgrade kits to make operation easier, increase the testing reliability, and to reduce handling times
  • Available for manual test fixtures and exchangeable kits
  • Wide range of varying functions
Actuator safety switch, magnetic FB-BTM-ATSMAxx Item 41552
  • Upgrade kits to make operation easier, increase the testing reliability, and to reduce handling times
  • Available for manual test fixtures and exchangeable kits
  • Wide range of varying functions
Detection - contacted FB-ABF-K-HMK-ATSMAxx Item 37667
  • Upgrade kits to make operation easier, increase the testing reliability, and to reduce handling times
  • Available for manual test fixtures and exchangeable kits
  • Wide range of varying functions
Detection - LED FB-ABF-L-OA-K3 Item 54789
  • Reliable testing of ON/OFF status of up to 3 LEDs simultaneously
  • Precise testing in the wavelength range from 420 nm to 1130 nm
  • Easy, space-saving assembly
  • Delivery includes three fibre optic cables and three receptacles for customised assembly on the UUT
S-Line assembly kit, bottom SBU-285-230-ATSMA12 Item 113150
  • Precise, reliable contacting in small grids
  • Quick, easy installation
  • Extensive, detailed customisation guidelines
  • Plate material is deflection-resistant FR4

Interface blocks

INGUN SELECTION SB-P-SI-136-4A-0,6
Interface block SB-P-SI-136-4A-0,6 Item 33665
  • Equipped with INGUN test probes
  • Uniformly parallel wire-wrap posts
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of low voltage signals
  • Pre-assembled plug connectors as connection accessories
Interface block SB-P-HF-016-4GHz-04-Z Item 38182
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-016-4GHz-06-Z Item 38180
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-SO-002-USB-RJ45 Item 54752
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances
  • High contact reliability and transmission quality
  • Reliable signal transmission
Interface block SB-P-HF-016-4GHz-12-Z Item 38174
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-SO-016-IDC Buchse Item 56990
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances
  • High contact reliability and transmission quality
  • Reliable signal transmission
Interface block SB-P-HF-016-0,7GHz-08 Item 38163
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-004-18GHz Item 35532
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-016-4GHz-03-Z Item 38183
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HS-002-50A-1,0 Item 31550
  • Equipped with INGUN test probes
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of high current signals
Interface block SB-P-HF-016-4GHz-08-Z Item 38178
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HS-045-30A-1,0-Z Item 38698
  • Equipped with INGUN test probes
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of high current signals
Interface block dummy plate SB-B-BLP-ALU Item 2487
  • Can be used in all test fixtures with internal or external pylon interface
  • To cover unused spaces for interface blocks
INGUN SELECTION SB-P-PN-008-PK3-A
Interface block SB-P-PN-008-PK3-A Item 37821
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact loss
  • High contact reliability and transmission quality
  • Reliable transmission of compressed air
Interface block SB-P-HF-008-6GHz-04-Z Item 42707
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-016-0,7GHz-02 Item 38169
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-SI-085-4A-0,6-Z Item 42344
  • Equipped with INGUN test probes
  • Uniformly parallel wire-wrap posts
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of low voltage signals
  • Pre-assembled plug connectors as connection accessories
Interface block SB-P-HF-016-0,7GHz-09 Item 38162
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-LL-024-DK1,5-Z Item 30211
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact loss
  • High contact reliability and transmission quality
  • Reliable transmission of light signals
Interface block SB-P-HF-016-0,7GHz-13 Item 38158
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HS-004-50A-1,0 Item 37698
  • Equipped with INGUN test probes
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of high current signals
Interface block SB-P-SI-170-4A-0,6-RD Item 52313
  • Equipped with INGUN test probes
  • Uniformly parallel wire-wrap posts
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of low voltage signals
  • Pre-assembled plug connectors as connection accessories
INGUN SELECTION SB-P-SI-170-4A-0,6
Interface block SB-P-SI-170-4A-0,6 Item 13515
  • Equipped with INGUN test probes
  • Uniformly parallel wire-wrap posts
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of low voltage signals
  • Pre-assembled plug connectors as connection accessories
INGUN SELECTION SB-P-HS-008-50A-1,0
Interface block SB-P-HS-008-50A-1,0 Item 35929
  • Equipped with INGUN test probes
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of high current signals
Interface block SB-P-MB-20/20-30A/DM2,3 Item 45305
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances
  • High contact reliability and transmission quality
  • Reliable transmission of several signal combinations
INGUN SELECTION SB-P-SI-170-4A-0,6-Z
Interface block SB-P-SI-170-4A-0,6-Z Item 38692
  • Equipped with INGUN test probes
  • Uniformly parallel wire-wrap posts
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of low voltage signals
  • Pre-assembled plug connectors as connection accessories
Interface block SB-P-HF-008-6GHz-05-Z Item 42706
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-SO-010-IDC Buchse Item 37662
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances
  • High contact reliability and transmission quality
  • Reliable signal transmission
Interface block SB-P-MB-20/4-30A/PK3-A Item 50581
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances
  • High contact reliability and transmission quality
  • Reliable transmission of several signal combinations
Interface block SB-P-HS-034-20A-1,0 Item 31009
  • Equipped with INGUN test probes
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of high current signals
Interface block SB-P-HF-016-4GHz-02-Z Item 38184
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-SI-136-4A-0,6-Z Item 109467
  • Equipped with INGUN test probes
  • Uniformly parallel wire-wrap posts
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of low voltage signals
  • Pre-assembled plug connectors as connection accessories
Interface block SB-P-HF-016-0,7GHz-10 Item 38161
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-SO-002-USB-3-Buchse Item 45557
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances
  • High contact reliability and transmission quality
  • Reliable signal transmission
Interface block SB-P-SO-002-Polklemme Item 35910
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances
  • High contact reliability and transmission quality
  • Reliable signal transmission
Interface block SB-P-HF-016-0,7GHz-03 Item 38168
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-SO-009-SUB-D Item 35909
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances
  • High contact reliability and transmission quality
  • Reliable signal transmission
Interface block SB-P-HF-016-4GHz-09-Z Item 38177
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-016-0,7GHz-01 Item 38170
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-016-4GHz-01-Z Item 38185
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-016-0,7GHz-05 Item 38166
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-004-18GHz-03 Item 55753
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-008-6GHz-Z Item 42627
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-016-0,7GHz-11 Item 38160
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
INGUN SELECTION SB-P-SI-040-4A-0,6
Interface block SB-P-SI-040-4A-0,6 Item 37074
  • Equipped with INGUN test probes
  • Uniformly parallel wire-wrap posts
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of low voltage signals
  • Pre-assembled plug connectors as connection accessories
Interface block SB-P-HF-016-4GHz-10-Z Item 38176
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-016-4GHz-15-Z Item 38171
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-016-0,7GHz-07 Item 38164
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-016-4GHz-Z Item 34571
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-016-4GHz-14-Z Item 38172
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-016-4GHz-07-Z Item 38179
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
INGUN SELECTION SB-P-HS-024-30A-1,0-Z
Interface block SB-P-HS-024-30A-1,0-Z Item 38700
  • Equipped with INGUN test probes
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of high current signals
Interface block SB-P-SO-026-IDC Buchse Item 56698
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances
  • High contact reliability and transmission quality
  • Reliable signal transmission
Interface block SB-P-HF-016-0,7GHz-14 Item 38157
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-016-0,7GHz-12 Item 38159
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-SO-020-IDC Buchse Item 56694
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances
  • High contact reliability and transmission quality
  • Reliable signal transmission
Interface block SB-P-HF-016-4GHz-05-Z Item 38181
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-004-18GHz-01 Item 55751
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-016-0,7GHz-06 Item 38165
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-008-6GHz-01-Z Item 42717
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-016-4GHz-11-Z Item 38175
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-LL-045-DM2,3 Item 29448
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact loss
  • High contact reliability and transmission quality
  • Reliable transmission of light signals
Interface block SB-P-HF-008-6GHz-03-Z Item 42708
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-016-4GHz-13-Z Item 38173
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-008-6GHz-06-Z Item 42629
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-016-0,7GHz-04 Item 38167
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-MB-20/4-30A/PK3 Item 31867
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances
  • High contact reliability and transmission quality
  • Reliable transmission of several signal combinations
Interface block SB-P-HF-008-6GHz-02-Z Item 42716
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-LL-045-DM1,0 Item 41020
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact loss
  • High contact reliability and transmission quality
  • Reliable transmission of light signals
Interface block SB-P-HF-016-0,7GHz Item 31002
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
INGUN SELECTION SB-P-SI-040-4A-0,6-Z
Interface block SB-P-SI-040-4A-0,6-Z Item 42339
  • Equipped with INGUN test probes
  • Uniformly parallel wire-wrap posts
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of low voltage signals
  • Pre-assembled plug connectors as connection accessories
INGUN SELECTION SB-P-HS-045-30A-1,0
Interface block SB-P-HS-045-30A-1,0 Item 16900
  • Equipped with INGUN test probes
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of high current signals
INGUN SELECTION SB-P-SI-085-4A-0,6
Interface block SB-P-SI-085-4A-0,6 Item 44271
  • Equipped with INGUN test probes
  • Uniformly parallel wire-wrap posts
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of low voltage signals
  • Pre-assembled plug connectors as connection accessories
INGUN SELECTION SB-P-HS-024-30A-1,0
Interface block SB-P-HS-024-30A-1,0 Item 27620
  • Equipped with INGUN test probes
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of high current signals
INGUN SELECTION SB-P-PN-008-PK3
Interface block SB-P-PN-008-PK3 Item 27622
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact loss
  • High contact reliability and transmission quality
  • Reliable transmission of compressed air
Interface block SB-P-HF-008-6GHz-07-Z Item 42628
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-016-0,7GHz-15 Item 38156
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes
Interface block SB-P-HF-004-18GHz-02 Item 55752
  • Can be used in all test fixtures with internal or external pylon interface
  • Consistently low contact resistances and replicable measured values
  • High contact reliability and transmission quality
  • Reliable transmission of radio-frequency signals
  • Primarily equipped with INGUN test probes

Customising accessory

Transfer field  TF-P-SI-030-L Item 48740
  • Trusted units for spring-loaded transmission of signals from top and/or side contacting
  • Quick, easy, freely adjustable installation
  • Available in various sizes with up to 40 poles
  • Available with wire-wrap and solder connection
  • Equipped with INGUN test probes
Stacking screw MSS-106-M5-08-ATSMAxx Item 41367
  • Sichere Verschraubung von Austauschsatz-Niederhalter (NDH) und Austauschsatz-Kontaktträgereinheit (KTE) zu einer Einheit
  • Einfache, sichere Lagerung/Transport des fest verbundenen Austauschsatzes
  • Verschraubte Einheit mit geschütztem Nadelbett
Transfer field  TF-P-SI-030-WW Item 48741
  • Trusted units for spring-loaded transmission of signals from top and/or side contacting
  • Quick, easy, freely adjustable installation
  • Available in various sizes with up to 40 poles
  • Available with wire-wrap and solder connection
  • Equipped with INGUN test probes
Button activator TAB-M-10-6-LK Item 57584
  • Prozesssichere Betätigung von Tastern und federnden Schaltern
  • Quick, easy, space-saving installation
  • Stufenlos einstellbar über Montagegewinde
  • Not air-tight
Transfer field  TF-P-SI-010-WW Item 48733
  • Trusted units for spring-loaded transmission of signals from top and/or side contacting
  • Quick, easy, freely adjustable installation
  • Available in various sizes with up to 40 poles
  • Available with wire-wrap and solder connection
  • Equipped with INGUN test probes
Stacking screw MSS-087-M5-08-ATSMAxx-NSRL Item 52394
  • Verbindung von Austauschsatz-Niederhalter (NDH) und Austauschsatz-Kontaktträgereinheit (KTE) zu einer Einheit
  • Einfache, sichere Lagerung/Transport des verbundenen Austauschsatzes
  • Verbundene Einheit mit geschütztem Nadelbett
INGUN SELECTION TAB-M-10-5
Button activator TAB-M-10-5 Item 19637
  • Prozesssichere Betätigung von Tastern und federnden Schaltern
  • Quick, easy, space-saving installation
  • Stufenlos einstellbar über Montagegewinde
  • Not air-tight
Transfer field  TF-P-SI-040-L Item 48742
  • Trusted units for spring-loaded transmission of signals from top and/or side contacting
  • Quick, easy, freely adjustable installation
  • Available in various sizes with up to 40 poles
  • Available with wire-wrap and solder connection
  • Equipped with INGUN test probes
Transfer field  TF-P-SI-010-L Item 48737
  • Trusted units for spring-loaded transmission of signals from top and/or side contacting
  • Quick, easy, freely adjustable installation
  • Available in various sizes with up to 40 poles
  • Available with wire-wrap and solder connection
  • Equipped with INGUN test probes
Transfer field  TF-P-SI-020-L Item 48738
  • Trusted units for spring-loaded transmission of signals from top and/or side contacting
  • Quick, easy, freely adjustable installation
  • Available in various sizes with up to 40 poles
  • Available with wire-wrap and solder connection
  • Equipped with INGUN test probes