Board marker probe ME-E-R2,0-08-053-2S-BL6V-42V Item 107376
New
slide 2 of 10
slide 1 to 6 of 10
- Short, compact design
- Marking tip with a new dual scratching engraver
- Precise, adjustable positioning
- Quick-exchange engraving unit
- Operating voltage from 6 V to 42 V
- Permanent marking of various materials
- Outstanding service life, highly resistant to wear
- Typical extraction force from receptacle: 3 N to 9.5 N
Board marker probe ME-E-R2,0-08-053-2S-BL6V-42V Item 107376
Please log in to show the price
Login
The prices listed in the scale are displayed rounded, therefore deviation in the total price is possible.
Shipping costs
* The prices are rounded to two decimal places.
Choose version
ME-E-R2,0-08-053-2S-BL6V-42V (107376)
INGUN SELECTION
Here you can optionally configure a new variant:
Technical data
| Product group : | Board marker probes (ME) |
|---|---|
| Series : | ME-E |
| Version : | Electrical |
| Accessory type : | Customising accessories |
| Outer dimensions (TxL) : | 8 x 53 mm |
| Outer thread : | M8 x 0,5 |
| Lock nut width across flats : | 10 mm |
| Marking type : | Circle |
| Approx. marking Ø : | 2 mm |
| Surface material : | Hard / soft |
| Weight : | 0.02 kg |
| Min. temperature : | + 10 °C |
| Max. temperature : | + 60 °C |
| RoHS-compliant : | RoHS-3;6c |
| Recommended working stroke : | 1 mm |
|---|---|
| Recommended marking impulse : | 1.0 s |
| Maximum stroke (ME) : | 1.6 mm |
| Approx. compression at working stroke : | 3 N |
| Marking tip : | Double-tip scratching engraver |
| Engraver material : | Solid carbide |
| Approx. engraver hardness : | 1600 HV |
| Drive : | Electric gear motor |
| Motor connection via : | Plug connector |
| Rated voltage : | 12 V DC |
| Rated output : | 0.12 W |
| No-load current : | 5 mA |
| Starting current : | 25 mA |
| Max. load current : | 10 mA |
| Max. torque : | 29 mNm |
| Approx. idle speed : | 138 U/min |
| Noise emission : | < 55 dB |
| Manual test fixtures (MA) : | MA 20xx |
|---|---|
| Pneumatic test fixtures (PA) : | PA xxxx |
| Vacuum test fixtures (VA) : | VA xxxx |
| MA exchangeable kits (ATS MA) : | ATS MAxx/xxx |
| VA exchangeable kits (ATS VA) : | ATS VINxxx |
| PA exchangeable kits (ATS PA) : | ATS PAZxxx, ATS PAxxxx |
MA exchangeable kits
slide 6 to 10 of 32
Exchangeable kit
ATS MA14/HF/AL/ESD
Item 154014
- Reliable, interference-free radio frequency contacting and measurement of radio frequency signals
- Outstanding shielding attenuation > 60 dB in the frequency range up to 6 GHz
- Radio-frequency and RF-compatible shielding from external and internal interference signals
- Safe to use in MA xxxx basic units
- Quick, tool-free set-up - ready for use without readjustment
Exchangeable kit
ATS MA09
Item 45994-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
INGUN SELECTION
Exchangeable kit
ATS MA11/S-5/ESD
Item 46026-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
INGUN SELECTION
Exchangeable kit
ATS MA12/S-7
Item 45903-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
INGUN SELECTION
Exchangeable kit
ATS MA12/S-7/ESD
Item 46236-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
Manual test fixture
slide 7 to 11 of 14
Manual test fixture
MA 2009/D/H
Item 105127
- Manual test fixtures with parallel closing drive mechanism for testing medium PCB quantities with the highest quality and precision
- Stand-alone test fixtures with and without pre-configured test system interface
- Integrated, non-exchangeable kits in standard, ESD and RF versions that can be used without readjustment
- Direct, hard-wired signal transmission
- Detailed accompanying documents (e.g., customising guidelines)
- Maximum opening angle may vary due to the length tolerance of +/- 2 mm of the gas spring
Manual test fixture
MA 2013/D/H/VPC-G12
Item 57325
- Manual test fixtures with parallel closing drive mechanism for testing medium PCB quantities with the highest quality and precision
- Stand-alone test fixtures with and without pre-configured test system interface
- Integrated, non-exchangeable kits in standard, ESD and RF versions that can be used without readjustment
- Direct, hard-wired signal transmission
- Detailed accompanying documents (e.g., customising guidelines)
- Maximum opening angle may vary due to the length tolerance of +/- 2 mm of the gas spring
Manual test fixture
MA 2012/D/H/HF
Item 54818
- Manual test fixtures with parallel closing drive mechanism for testing medium PCB quantities with the highest quality and precision
- Stand-alone test fixtures with and without pre-configured test system interface
- Integrated, non-exchangeable kits in standard, ESD and RF versions that can be used without readjustment
- Direct, hard-wired signal transmission
- Detailed accompanying documents (e.g., customising guidelines)
- Maximum opening angle may vary due to the length tolerance of +/- 2 mm of the gas spring
INGUN SELECTION
Manual test fixture
MA 2013/D/H
Item 48620
- Manual test fixtures with parallel closing drive mechanism for testing medium PCB quantities with the highest quality and precision
- Stand-alone test fixtures with and without pre-configured test system interface
- Integrated, non-exchangeable kits in standard, ESD and RF versions that can be used without readjustment
- Direct, hard-wired signal transmission
- Detailed accompanying documents (e.g., customising guidelines)
- Maximum opening angle may vary due to the length tolerance of +/- 2 mm of the gas spring
Manual test fixture
MA 2012/D/H/PYLON-12
Item 51865
- Manual test fixtures with parallel closing drive mechanism for testing medium PCB quantities with the highest quality and precision
- Stand-alone test fixtures with and without pre-configured test system interface
- Integrated, non-exchangeable kits in standard, ESD and RF versions that can be used without readjustment
- Direct, hard-wired signal transmission
- Detailed accompanying documents (e.g., customising guidelines)
- Maximum opening angle may vary due to the length tolerance of +/- 2 mm of the gas spring
Vacuum test fixtures
slide 1 to 2 of 2
INGUN SELECTION
Vacuum test fixture
VA 2070S/i3070-5
Item 4844-KIT
- Vacuum test fixture with parallel closing vacuum cassette for testing large PCB quantities
- Robust, maintenance-friendly design with outstanding service life
- Available for Keysight i3070 test system
- Increased ease of use without significant closing forces
- Single-stage and dual-stage versions
- Single-stage and dual-stage versions
- Detailed accompanying documents (e.g., customising guidelines)
Vacuum test fixture
VA 2073L/i3070-5
Item 8326
- Vacuum test fixture with parallel closing vacuum cassette for testing large PCB quantities
- Robust, maintenance-friendly design with outstanding service life
- Stand-alone test fixtures with pre-configured test system interface
- Available for Keysight i3070 test system
- Increased ease of use without significant closing forces
- Single-stage and dual-stage versions
- Detailed accompanying documents (e.g., customising guidelines)
PA exchangeable kits
slide 1 to 2 of 2
Exchangeable kit
ATS PAZ215
Item 18958
- Quick, tool-free set-up, can be used without readjustment
- Available in standard and ESD versions, with or without internal interface
- Signal transmission using VG multipoint connectors or contact terminals for individual configurations
Exchangeable kit
ATS PAZ400
Item 28491
- Quick, tool-free set-up, can be used without readjustment
- Available in standard and ESD versions, with or without internal interface
- Signal transmission using VG multipoint connectors or contact terminals for individual configurations
Compatible accessories
slide 1 to 2 of 2
Engraving unit
GE-E-R2,0-07-050-2S-SK3V
Item 107374
- Spare part for part 107376, to replace worn units
Adapter sleeve board marker
ADH-ME-M8-M12-SW14
Item 108441
- For quick, easy installation in a M12x1 threaded bore
- In customised test fixtures, large board marker probes (external thread M12x1) can be replaced by small board marker probes (external thread M8x0.5)
Pneumatic test fixtures
slide 1 of 1
Pneumatic test fixture
PA 2130/D/H
Item 20598
- Pneumatic test fixture with parallel closing drive for testing medium PCB quantities
- Robust, durable test fixture with cam disc
- Standard and ESD exchangeable kits that can be exchanged quickly and without tools
- Increased ease of use without significant closing forces
- Rapid contacting movement