Board marker probe   ME-E-R2,0-12-060-K12V Item 24447

Downloads
Conformation of RoHS compliance (EN|PDF)
CAD file (INGUN_24447.STEP)
CAD file (INGUN_24447.STEP)
Product datasheet (EN|pdf)
Choose version
ME-E-R2,0-12-060-K12V (24447) INGUN SELECTION
Here you can optionally configure a new variant:
Technical data
General data
Product group : Board marker probes (ME)
Series : ME-E
Version : Electrical
Accessory type : Customising accessory
Outer dimensions (TxL) : 12 x 60 mm
Outer thread : M12 x 1
Lock nut width across flats : 14 mm
Marking type : Circle
Approx. marking Ø : 2 mm
Surface material : Hard / soft
Weight : 0.04 kg
Min. temperature : - 20 °C
Max. temperature : + 65 °C
RoHS-compliant : RoHS-3
Technical data
Recommended working stroke : 1.5 mm
Recommended marking impulse : 1.0 s
Maximum stroke (ME) : 2 mm
Approx. compression at working stroke : 3 N
Marking tip : Scratching engraver
Engraver material : Solid carbide
Approx. engraver hardness : 1600 HV
Drive : Electric gear motor
Motor connection via : Cable
Rated voltage : 12 V DC
Rated output : 0.75 W
No-load current : 3.68 mA
Starting current : 106 mA
Connecting resistance : 114 Ohm
Max. load current : 81 mA
Max. torque : 54 mNm
Approx. idle speed : 180 U/min
Noise emission : Not relevant
Compatible with
Manual test fixtures (MA) : MA 20xx
Pneumatic test fixtures (PA) : PA xxxx
Vacuum test fixtures (VA) : VA xxxx
MA exchangeable kits (ATS MA) : ATS MA2xx, ATS MA3xx, ATS MAxxxx, ATS MAxx
VA exchangeable kits (ATS VA) : VIN 423 # VIN 2040
PA exchangeable kits (ATS PA) : ATS PAZxxx