Manual test fixture MA 2115/D/H/S-14 Item 116000
New
- Manual test fixture with parallel closing drive mechanism for testing medium quantities of printed circuit boards in the highest quality and small number of versions.
- Interchangeable set of test fixtures without preconfigured test system interface
- High housing with two foldable handles on each side for better carrying comfort
- Two gas springs in the housing, each with 300 N, support easy, safe opening and closing
- Anti-pinch protection on both sides increases operator safety
- Modular, configurable internal interface for up to 14 interface blocks
- Exchangeable kits which can be installed without tools and used without readjustment
- Maximum opening angle may vary due to the length tolerance of +/- 2 mm of the gas spring
Manual test fixture MA 2115/D/H/S-14 Item 116000
Please log in to show the price
Login
The prices listed in the scale are displayed rounded, therefore deviation in the total price is possible.
Shipping costs
* The prices are rounded to two decimal places.
Choose version
MA 2115/D/H/S-14 (116000)
INGUN SELECTION
Here you can optionally configure a new variant:
Technical data
| Product group : | Manual test fixtures (MA) |
|---|---|
| Main series : | MA xxxx |
| Subseries : | MA 21xx |
| Series : | MA 2115 |
| Size : | xx15 |
| Test fixture type : | Exchangeable test fixture |
| Contact stroke generation : | Manual |
| Housing type : | High desk housing |
| Max. interface signals : | 1700 |
| Interface blocks required : | Test system side |
| Max. internal interface blocks : | 14 |
| Contacting direction : | Single-sided (bottom) |
| Max. contact force : | 2000 N |
| Approx. parallel contact stroke : | 15 mm |
| Test system interface : | Not pre-wired |
| Weight : | 25 kg |
| Min. temperature : | + 10 °C |
| Max. temperature : | + 60 °C |
| Low voltage : | No |
| ESD-compliant : | No |
| RoHS-compliant : | RoHS-3;6c |
| Test probe installation height, top : | 16 mm |
|---|---|
| Test probe installation height, bottom : | 10.5 mm |
| Test probe installation height, dual-stage, bottom : | 16 mm |
| Free space above PCB : | 58 mm |
| Pressure frame closing force : | 120 N |
| Force of gas pressure springs : | 600 N (300 N left/ 300 N right) |
| Pressure frame opening angle : | 69 ° |
| Standard version : | Yes, with suitable exchangeable kit |
| Useable area, standard (WxD) : | 600 x 450 mm |
| ESD version : | No |
| Radio frequency version : | No |
| Rigid pin version : | No |
| Dual-stage version : | Yes, with suitable additional option |
| Useable area, dual-stage (WxD) : | 600 x 450 mm |
| Additional contacting unit (ZSK), top : | Yes, with suitable additional option |
| Outer dimensions, open (WxDxH) : | 830 x 666 x 878 mm |
| Outer dimensions, closed (WxDxH) : | 830 x 728 x 375 mm |