Receptacle A KS-113 30 M2 Item KS-11330M2
Receptacle A KS-113 30 M2 Item KS-11330M2
Please log in to show the price
Login
The prices listed in the scale are displayed rounded, therefore deviation in the total price is possible.
Shipping costs
* The prices are rounded to two decimal places.
Technical data
| Product group : | Receptacles (KS) |
|---|---|
| Series : | KS-113 |
| Sub-series : | KS-113 M screw-in version |
| Type of receptacle connection : | Solder |
| Press ring : | No |
| Surface area : | Gold |
| Collar diameter : | 3.2 mm |
| Collar height : | 0.2 mm |
| Knurl : | No |
| Vacuum-tight : | No |
| RoHS-compliant : | RoHS-3;6c |
| Mounting hole in CEM1 : | 2.99 mm |
|---|---|
| Mounting hole in FR4 : | 2.99 mm |
| Total length : | 27 mm |
|---|---|
| Outer diameter : | 3 mm |
Spacer sleeve
Test probes for installation height, Test probes
Step probe
T-888 M
- Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
- For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
- Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
High-current probe
HSS-120 M
- Trusted high-current probes, optimally sized for current load capacity ratio
- Low-Ohm probe with Ri typical: < 10 mOhm
- For use in function and burn-in tests
- Large selection of tip styles and spring forces for optimum contact with DUT
- Secure hold in the receptacle thanks to the threaded connection
Step probe
T-113 M
- Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
- For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
Spring-loaded test probe
GKS-113 M
- Screw-in test probes for applications with possible vibrations or unwanted side and axial forces (migration of the test probe out of the receptacle is reliably prevented)
- The screw-in test probe is securely installed in the KS using a torque screwdriver and bit tool. The required screw-in torque is applied via a square post on the receptacle.
- Stainless steel versions for temperatures from -100 °C up to +200 °C available