Receptacle A KS-112 30 M-R Item KS-11230M-R

INGUN SELECTION

Receptacle A KS-112 30 M-R Item KS-11230M-R

Please log in to show the price
The prices listed in the scale are displayed rounded, therefore deviation in the total price is possible. Shipping costs * The prices are rounded to two decimal places.
Downloads
Conformation of RoHS compliance (EN|PDF)
CAD file (INGUN_KS-112_30_M-R.STEP)
Product datasheet (EN|pdf)
Choose version
KS-112 30 M-R (KS-11230M-R) INGUN SELECTION
KS-112 30 M (KS-11230M) INGUN SELECTION KS-112 30 M-R-Z (KS-11230M-R-Z) INGUN SELECTION KS-112 46 M (KS-11246M) INGUN SELECTION KS-112 30 M-R (KS-11230M-R) INGUN SELECTION KS-112 30 M-T (KS-11230M-T) INGUN SELECTION
Here you can optionally configure a new variant:
Technical data
General data
Product group : Receptacles (KS)
Series : KS-112
Sub-series : KS-112 M screw-in version
Type of receptacle connection : Solder
Press ring : No
Surface area : Gold
Collar diameter : 2.2 mm
Collar height : 0.2 mm
Knurl : Yes
Vacuum-tight : No
RoHS-compliant : RoHS-3;6c
Mounting hole
Mounting hole in CEM1 : 2.00 - 2.02 mm
Mounting hole in FR4 : 2.00 - 2.02 mm
Mechanical data
Total length : 33 mm
Outer diameter : 2 mm

Test probes for installation height, Test probes

GKS-112 MD
Spring-loaded test probe, flying probe GKS-112 MD
Open versions
GKS-112 MDL
Spring-loaded test probe, flying probe GKS-112 MDL
Open versions
T-112 M
Step probe T-112 M
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
Open versions
GKS-112 M
Spring-loaded test probe GKS-112 M
  • Screw-in test probes for applications with possible vibrations or unwanted side and axial forces (migration of the test probe out of the receptacle is reliably prevented)
  • The screw-in test probe is securely installed in the KS using a torque screwdriver and bit tool. The required screw-in torque is applied via a square post on the receptacle.
  • Stainless steel versions for temperatures from -100 °C up to +200 °C available
Open versions
GKS-112 MT
Spring-loaded test probe GKS-112 MT
  • Screw-in test probes for applications with possible vibrations or unwanted side and axial forces (migration of the test probe out of the receptacle is reliably prevented)
  • The screw-in test probe is securely installed in the KS using a torque screwdriver and bit tool. The required screw-in torque is applied via a square post on the receptacle.
Open versions
T-912 M
Step probe T-912 M
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Open versions
HSS-118 M
High-current probe HSS-118 M
  • Trusted high-current probes, optimally sized for current load capacity ratio
  • Low-Ohm probe with Ri typical: < 10 mOhm
  • For use in function and burn-in tests
  • Large selection of tip styles and spring forces for optimum contact with DUT
  • Secure hold in the receptacle thanks to the threaded connection
Open versions