KS with a square post and press ring KS-100 47 G-18 Item KS-10047G-18

Downloads
Conformation of RoHS compliance (EN|PDF)
Product datasheet (EN|pdf)
CAD file (INGUN_KS-100_47_G-18.STEP)
Choose version
KS-100 47 G-18 (KS-10047G-18)
KS-100 30 93 (KS-1003093) KS-100 30 G12 (KS-10030G12) INGUN SELECTION KS-100 47 05 (KS-1004705) INGUN SELECTION KS-100 47 25 (KS-1004725) INGUN SELECTION KS-100 47 93 (KS-1004793) KS-100 47-13 (KS-10047-13) KS-100 47-18 (KS-10047-18) KS-100 30 (KS-10030) INGUN SELECTION KS-100 30 25 (KS-1003025) INGUN SELECTION KS-100 30 40 (KS-1003040) INGUN SELECTION KS-100 47 40 (KS-1004740) INGUN SELECTION KS-100 47 G (KS-10047G) INGUN SELECTION KS-100 47 G-18 (KS-10047G-18) KS-100 47 G12 (KS-10047G12) INGUN SELECTION KS-100 30 05 (KS-1003005) INGUN SELECTION KS-100 30 G (KS-10030G) INGUN SELECTION KS-100 44 G (KS-10044G) INGUN SELECTION KS-100 47 (KS-10047) INGUN SELECTION KS-100 47 G-13 (KS-10047G-13) KS-100 47 G12-13 (KS-10047G12-13)
Here you can optionally configure a new variant:
Technical data
General data
Product group : Receptacles (KS)
Series : KS-100
Sub-series : KS-100 press-in version
Type of receptacle connection : Wire-wrap
Press ring : Yes
Surface area : Gold
Collar diameter : 1.85 mm
Collar height : 7.6 mm
Wire-wrap post length : 18.2 mm
Knurl : No
Vacuum-tight : yes (< 1 ccm / min)
RoHS-compliant : RoHS-3
Mounting hole
Mounting hole in CEM1 : 1.68 - 1.69 mm
Mounting hole in FR4 : 1.69 - 1.70 mm
Mounting hole with press ring in CEM1 : 1.70 - 1.75 mm
Mounting hole with press ring in FR4 : 1.70 - 1.75 mm
Mechanical data
Total length : 48.2 mm
Outer diameter : 1.67 mm

Test probes for installation height, Test probes

Spring-loaded test probe GKS-135
  • For optimum contact at the test points (e.g. pads, vias, and pins), various tip styles in different diameters and finishes, as well as various spring forces are available. spring forces.
High-current probe HSS-100
  • Trusted, robust high-current probes, optimally sized for current load capacity ratio
  • Low resistance probe with Ri typical: < 10 mOhm
  • For use in function and burn-in tests
  • Large selection of tip styles and spring forces for optimum contact with DUT
  • Optimum adjustment of the stroke ratios in the test fixture: The test probe collar is available in different heights, which, in combination with the receptacles, allows a range of installation heights
INGUN E-TYPE® E-100
  • Highest contact reliability under challenging test conditions without additional stress on the DUT: up to 25% larger contact surface between test probe and DUT
  • When hitting the test surface a spring force up to 100% higher than a standard GKS is available, but the same spring force as a standard GKS is achieved at the working stroke.
  • Dimensions equivalent to the standard GKS series