Spacer sleeve A DS-112 03 Item DS-11203

Downloads
Conformation of RoHS compliance (EN|PDF)
Product datasheet (EN|pdf)
CAD file (INGUN_DS-112_03.STEP)
Choose version
DS-112 03 (DS-11203) INGUN SELECTION
DS-112 03 (DS-11203) INGUN SELECTION DS-112 05 (DS-11205) INGUN SELECTION DS-112 01 (DS-11201) DS-112 02 (DS-11202) INGUN SELECTION
Here you can optionally configure a new variant:
Technical data
General data
Product group : Spacer sleeves (DS)
Series : DS-112
Compatible test probe(s) : DS-112
Grid : 2.54 mm
Material : 1 brass
Magnetic : Yes
Surface area : A gold
RoHS-compliant : RoHS-3;6c
Mechanical data
Total length : 3 mm
Inner diameter : 1.7 mm
Outer diameter : 2.2 mm

Test probes

High-current probe HSS-118
  • Trusted, robust high-current probes, optimally sized for current load capacity ratio
  • Low resistance probe with Ri typical: < 10 mOhm
  • For use in function and burn-in tests
  • Large selection of tip styles and spring forces for optimum contact with DUT
  • Optimum adjustment of the stroke ratios in the test fixture: The test probe collar is available in different heights, which, in combination with the receptacles, allows a range of installation heights
Switching probe SKS-215
  • For a wide range of applications: performs components detection check, is a switch for detecting closed/open states, and a signal transmitter for process control
  • The electrical connection is ensured by installation using a receptacle
  • Designed as normally open (NO), i.e. The circuit is closed when actuated
Switching probe SKS-215 E
  • For a wide range of applications: performs components detection check, is a switch for detecting closed/open states, and a signal transmitter for process control
  • The electrical connection is ensured by installation using a receptacle
  • Designed as normally open (NO), i.e. The circuit is closed when actuated
Spring-loaded test probe GKS-204
  • Robust test probes with distinctive collar (stop) on the barrel
  • Optimum adjustment of the stroke ratios in the test fixture: The collar is available in different heights, which, in combination with the receptacles, allows a range of installation heights
  • Version with central beading ensure low wobble for contacting small test points
Spring-loaded test probe GKS-112
  • Robust test probes with distinctive collar (stop) on the barrel
  • Optimum adjustment of the stroke ratios in the test fixture: The collar is available in different heights, which, in combination with the receptacles, allows a range of installation heights
  • Stainless steel versions for temperatures from -100 °C up to +200 °C available
INGUN E-TYPE® E-422
  • Highest contact reliability under challenging test conditions without additional stress on the DUT: up to 25% larger contact surface between test probe and DUT
  • When hitting the test surface a spring force up to 100% higher than a standard GKS is available, but the same spring force as a standard GKS is achieved at the working stroke.
  • Dimensions equivalent to the standard GKS series
Spring-loaded test probe GKS-422
  • Robust test probes with distinctive collar (stop) on the barrel
  • Optimum adjustment of the stroke ratios in the test fixture: The collar is available in different heights, which, in combination with the receptacles, allows a range of installation heights
  • Version with central beading ensure low wobble for contacting small test points
  • Stainless steel versions for temperatures from -100 °C up to +200 °C available
Spring-loaded test probe GKS-912
  • Robust test probes with distinctive collar (stop) on the barrel
  • Optimum adjustment of the stroke ratios in the test fixture: The collar is available in different heights, which, in combination with the receptacles, allows a range of installation heights
  • Version with central beading ensure low wobble for contacting small test points
  • Stainless steel versions for temperatures from -100 °C up to +200 °C available
Spring-loaded test probe GKS-412
  • Robust test probes with distinctive collar (stop) on the barrel
  • Optimum adjustment of the stroke ratios in the test fixture: The collar is available in different heights, which, in combination with the receptacles, allows a range of installation heights
Spring-loaded test probe GKS-912 214 180 A 3002 C Item GKS-912-2709
  • Robust test probes with distinctive collar (stop) on the barrel
  • Optimum adjustment of the stroke ratios in the test fixture: The collar is available in different heights, which, in combination with the receptacles, allows a range of installation heights
  • Version with central beading ensure low wobble for contacting small test points
  • Stainless steel versions for temperatures from -100 °C up to +200 °C available