Push rod NHS-ST-60,0-2,5-POM-AL Item 21615
Push rod NHS-ST-60,0-2,5-POM-AL Item 21615
Please log in to show the price
Login
The prices listed in the scale are displayed rounded, therefore deviation in the total price is possible.
Shipping costs
* The prices are rounded to two decimal places.
Technical data
| Product group : | Push rods (NHS) |
|---|---|
| Series : | NHS-ST |
| Type : | Starr |
| Version : | Not ESD compliant |
| Accessory type : | Customising accessory |
| Scope of delivery : | Must be installed upon delivery, M4x20 T20 included |
| Outer dimensions (TxL) : | 6.0 x 60 mm |
| Colour : | Untreated |
| RoHS-compliant : | RoHS-3 |
| Total length : | 60 mm |
|---|
| Tip diameter : | 2.5 mm |
|---|---|
| Pushrod shaft diameter : | 6 mm |
| Tip material : | POM |
| Shaft material : | AL |
| True running : | 2768-mK |
| Installation : | Screwed in |
| Thread : | M4x10 mm |
| Tip length : | 20 mm |
| Exchangeable kits version : | Standard, ESD, RF |
|---|---|
| Manual test fixtures (MA) : | MA 20xx |
| MA exchangeable kits (ATS MA) : | ATS MAxx, ATS MA2xx, ATS MA3xx |
INGUN SELECTION
Manual test fixture
MA 2012/D/H
Item 48530
- Manual test fixtures with parallel closing drive mechanism for testing medium PCB quantities with the highest quality and precision
- Stand-alone test fixtures with and without pre-configured test system interface
- Permanently mounted, non-exchangeable kits in standard, ESD and RF versions that can be used without readjustment
- Direct, hard-wired signal transmission
- Detailed accompanying documents (e.g., customising guidelines)
- Maximum opening angle may vary due to the length tolerance of +/- 2 mm of the gas spring
Manual test fixture
MA 2013/D/H/PYLON-12
Item 53230
- Manual test fixtures with parallel closing drive mechanism for testing medium PCB quantities with the highest quality and precision
- Stand-alone test fixtures with and without pre-configured test system interface
- Permanently mounted, non-exchangeable kits in standard, ESD and RF versions that can be used without readjustment
- Direct, hard-wired signal transmission
- Detailed accompanying documents (e.g., customising guidelines)
- Maximum opening angle may vary due to the length tolerance of +/- 2 mm of the gas spring
Manual test fixture
MA 2012/D/H/HG
Item 101930
- Manual test fixtures with parallel closing drive mechanism for testing medium PCB quantities with the highest quality and precision
- Stand-alone test fixtures with and without pre-configured test system interface
- Permanently mounted, non-exchangeable kits in standard, ESD and RF versions that can be used without readjustment
- Direct, hard-wired signal transmission
- Detailed accompanying documents (e.g., customising guidelines)
- Maximum opening angle may vary due to the length tolerance of +/- 2 mm of the gas spring
Manual test fixture
MA 2012/D/H/GR2270/71
Item 53350
- Manual test fixtures with parallel closing drive mechanism for testing medium PCB quantities with the highest quality and precision
- Stand-alone test fixtures with and without pre-configured test system interface
- Permanently mounted, non-exchangeable kits in standard, ESD and RF versions that can be used without readjustment
- Direct, hard-wired signal transmission
- Detailed accompanying documents (e.g., customising guidelines)
- Maximum opening angle may vary due to the length tolerance of +/- 2 mm of the gas spring
Manual test fixture
MA 2013/D/H/VPC-G12x-18
Item 53390
- Manual test fixtures with parallel closing drive mechanism for testing medium PCB quantities with the highest quality and precision
- Stand-alone test fixtures with and without pre-configured test system interface
- Permanently mounted, non-exchangeable kits in standard, ESD and RF versions that can be used without readjustment
- Direct, hard-wired signal transmission
- Detailed accompanying documents (e.g., customising guidelines)
- Maximum opening angle may vary due to the length tolerance of +/- 2 mm of the gas spring
Manual test fixture
MA 2013/D/H/VPC-G12
Item 57325
- Manual test fixtures with parallel closing drive mechanism for testing medium PCB quantities with the highest quality and precision
- Stand-alone test fixtures with and without pre-configured test system interface
- Permanently mounted, non-exchangeable kits in standard, ESD and RF versions that can be used without readjustment
- Direct, hard-wired signal transmission
- Detailed accompanying documents (e.g., customising guidelines)
- Maximum opening angle may vary due to the length tolerance of +/- 2 mm of the gas spring
Manual test fixture
MA 2014/D/H
Item 100690
- Manual test fixtures with parallel closing drive mechanism for testing medium PCB quantities with the highest quality and precision
- Stand-alone test fixtures with and without pre-configured test system interface
- Permanently mounted, non-exchangeable kits in standard, ESD and RF versions that can be used without readjustment
- Direct, hard-wired signal transmission
- Detailed accompanying documents (e.g., customising guidelines)
- Maximum opening angle may vary due to the length tolerance of +/- 2 mm of the gas spring
Manual test fixture
MA 2013/D/H/HG
Item 100720
- Manual test fixtures with parallel closing drive mechanism for testing medium PCB quantities with the highest quality and precision
- Stand-alone test fixtures with and without pre-configured test system interface
- Permanently mounted, non-exchangeable kits in standard, ESD and RF versions that can be used without readjustment
- Direct, hard-wired signal transmission
- Detailed accompanying documents (e.g., customising guidelines)
- Maximum opening angle may vary due to the length tolerance of +/- 2 mm of the gas spring
Manual test fixture
MA 2009/D/H
Item 105127
- Manual test fixtures with parallel closing drive mechanism for testing medium PCB quantities with the highest quality and precision
- Stand-alone test fixtures with and without pre-configured test system interface
- Permanently mounted, non-exchangeable kits in standard, ESD and RF versions that can be used without readjustment
- Direct, hard-wired signal transmission
- Detailed accompanying documents (e.g., customising guidelines)
- Maximum opening angle may vary due to the length tolerance of +/- 2 mm of the gas spring
INGUN SELECTION
Manual test fixture
MA 2013/D/H
Item 48620
- Manual test fixtures with parallel closing drive mechanism for testing medium PCB quantities with the highest quality and precision
- Stand-alone test fixtures with and without pre-configured test system interface
- Permanently mounted, non-exchangeable kits in standard, ESD and RF versions that can be used without readjustment
- Direct, hard-wired signal transmission
- Detailed accompanying documents (e.g., customising guidelines)
- Maximum opening angle may vary due to the length tolerance of +/- 2 mm of the gas spring
Manual test fixture
MA 2012/D/H/PYLON-12
Item 51865
- Manual test fixtures with parallel closing drive mechanism for testing medium PCB quantities with the highest quality and precision
- Stand-alone test fixtures with and without pre-configured test system interface
- Permanently mounted, non-exchangeable kits in standard, ESD and RF versions that can be used without readjustment
- Direct, hard-wired signal transmission
- Detailed accompanying documents (e.g., customising guidelines)
- Maximum opening angle may vary due to the length tolerance of +/- 2 mm of the gas spring
Manual test fixture
MA 2012/D/H/VPC-G12
Item 59830
- Manual test fixtures with parallel closing drive mechanism for testing medium PCB quantities with the highest quality and precision
- Stand-alone test fixtures with and without pre-configured test system interface
- Permanently mounted, non-exchangeable kits in standard, ESD and RF versions that can be used without readjustment
- Direct, hard-wired signal transmission
- Detailed accompanying documents (e.g., customising guidelines)
- Maximum opening angle may vary due to the length tolerance of +/- 2 mm of the gas spring
Manual test fixture
MA 2012/D/H/HF
Item 54818
- Manual test fixtures with parallel closing drive mechanism for testing medium PCB quantities with the highest quality and precision
- Stand-alone test fixtures with and without pre-configured test system interface
- Permanently mounted, non-exchangeable kits in standard, ESD and RF versions that can be used without readjustment
- Direct, hard-wired signal transmission
- Detailed accompanying documents (e.g., customising guidelines)
- Maximum opening angle may vary due to the length tolerance of +/- 2 mm of the gas spring
INGUN SELECTION
Manual test fixture
MA 2011/D/H
Item 48590
- Manual test fixtures with parallel closing drive mechanism for testing medium PCB quantities with the highest quality and precision
- Stand-alone test fixtures with and without pre-configured test system interface
- Permanently mounted, non-exchangeable kits in standard, ESD and RF versions that can be used without readjustment
- Direct, hard-wired signal transmission
- Detailed accompanying documents (e.g., customising guidelines)
- Maximum opening angle may vary due to the length tolerance of +/- 2 mm of the gas spring
S-Line assembly kit, bottom
SBU-285-230-ATSMA12
Item 113150
- Precise, reliable contacting in small grids
- Quick, easy installation
- Extensive, detailed customisation guidelines
- Plate material is deflection-resistant FR4
Exchangeable kit
ATS MA11/HF/AL/ESD
Item 154011
- Reliable, interference-free radio frequency contacting and measurement of radio frequency signals
- Outstanding shielding attenuation > 60 dB in the frequency range up to 6 GHz
- Radio-frequency and RF-compatible shielding from external and internal interference signals
- Safe to use in MA xxxx basic units
- Quick, tool-free set-up - ready for use without readjustment
INGUN SELECTION
Exchangeable kit
ATS MA13
Item 45980-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
Exchangeable kit
ATS MA11/S-5/HF/AL/ESD
Item 154111
- Reliable, interference-free radio frequency contacting and measurement of radio frequency signals
- Outstanding shielding attenuation > 60 dB in the frequency range up to 6 GHz
- Radio-frequency and RF-compatible shielding from external and internal interference signals
- Safe to use in MA xxxx basic units
- Quick, tool-free set-up - ready for use without readjustment
Exchangeable kit
ATS MA14/S-10/HF/AL/ESD
Item 154114
- Reliable, interference-free radio frequency contacting and measurement of radio frequency signals
- Outstanding shielding attenuation > 60 dB in the frequency range up to 6 GHz
- Radio-frequency and RF-compatible shielding from external and internal interference signals
- Safe to use in MA xxxx basic units
- Quick, tool-free set-up - ready for use without readjustment
Exchangeable kit
ATS MA13/S-10/CRS
Item 108813
- Reliable ICT/FCT tests in the fully automated inline test system and in the manual test fixture
- Replacement kit for CRS test system SMART-Inline, IPS 19-2 and manual test fixture MA 2113, MA 3213
- Modularly configurable signal transmission with internal interfaces
- Quick, tool-free set-up, can be used without readjustment
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Designed for tooling pins with head length = 16 mm (FS-X,XX-RD-16-02)
S-Line assembly kit, bottom
SBU-145-230-WL-ATSMA11
Item 113313
- Precise, reliable contacting in small grids
- Quick, easy installation
- Extensive, detailed customisation guidelines
- Plate material is deflection-resistant FR4
INGUN SELECTION
Exchangeable kit
ATS MA13/S-10/ESD
Item 46239-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
Exchangeable kit
ATS MA14/S-10/CRS
Item 108814
- Reliable ICT/FCT tests in the fully automated inline test system and in the manual test fixture
- Replacement kit for CRS test system SMART-Inline, IPS 19-2 and manual test fixture MA 2114, MA 3214
- Modularly configurable signal transmission with internal interfaces
- Quick, tool-free set-up, can be used without readjustment
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Designed for tooling pins with head length = 16 mm (FS-X,XX-RD-16-02)
Exchangeable kit
ATS MA350/ESD
Item 46490-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard and ESD versions, without internal interface
- Signal transmission using VG multipoint connectors for individual configurations
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
INGUN SELECTION
Exchangeable kit
ATS MA11
Item 45900-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
INGUN SELECTION
Exchangeable kit
ATS MA11/S-5
Item 45898-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
Exchangeable kit
ATS MA14
Item 45985-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
Exchangeable kit
ATS MA14/ESD
Item 46257-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
Rigid pin unit
SNK-482-274-ATSMA14
Item 109235-KIT
- Rigid pin units for reliable contacting in small grids, compatible with INGUN exchangeable kits for modular expansion
- Available for all standard exchangeable kits ATS MAxx
- Quick, easy mounting on moving plate
- Free overall height above the printed circuit board of 8 mm
- FR4 precision plates ground to a smooth finish
INGUN SELECTION
Exchangeable kit
ATS MA12
Item 45904-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
Exchangeable kit
ATS MA12/ESD
Item 46250-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
INGUN SELECTION
Exchangeable kit
ATS MA260
Item 41220-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard and ESD versions, without internal interface
- Signal transmission using VG multipoint connectors for individual configurations
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
S-Line assembly kit, bottom
SBU-440-300-ATSMA13
Item 113322
- Precise, reliable contacting in small grids
- Quick, easy installation
- Extensive, detailed customisation guidelines
- Plate material is deflection-resistant FR4
S-Line assembly kit, bottom
SBU-540-300-ATSMA14
Item 113329
- Precise, reliable contacting in small grids
- Quick, easy installation
- Extensive, detailed customisation guidelines
- Plate material is deflection-resistant FR4
Rigid pin cover
SNH-226-204-ATSMA12
Item 108795-KIT
- Expansion kit for rigid pin units
- Available for all standard exchangeable kits ATS MAxx
- Quick, easy mounting on pressure frame plate
- Free overall height above the printed circuit board of 58 mm
Rigid pin unit
SNK-086-204-ATSMA11
Item 109217-KIT
- Rigid pin units for reliable contacting in small grids, compatible with INGUN exchangeable kits for modular expansion
- Available for all standard exchangeable kits ATS MAxx
- Quick, easy mounting on moving plate
- Free overall height above the printed circuit board of 8 mm
- FR4 precision plates ground to a smooth finish
Exchangeable kit
ATS MA09/S-5
Item 45990-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
Exchangeable kit
ATS MA13/S-10/HF/AL/ESD
Item 154113
- Reliable, interference-free radio frequency contacting and measurement of radio frequency signals
- Outstanding shielding attenuation > 60 dB in the frequency range up to 6 GHz
- Radio-frequency and RF-compatible shielding from external and internal interference signals
- Safe to use in MA xxxx basic units
- Quick, tool-free set-up - ready for use without readjustment
Rigid pin cover
SNH-086-134-ATSMA09
Item 109244-KIT
- Expansion kit for rigid pin units
- Available for all standard exchangeable kits ATS MAxx
- Quick, easy mounting on pressure frame plate
- Free overall height above the printed circuit board of 58 mm
INGUN SELECTION
Exchangeable kit
ATS MA11/S-5/ESD
Item 46026-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
INGUN SELECTION
Exchangeable kit
ATS MA360
Item 45669-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard and ESD versions, without internal interface
- Signal transmission using VG multipoint connectors for individual configurations
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
Rigid pin unit
SNK-382-274-ATSMA13
Item 109226-KIT
- Rigid pin units for reliable contacting in small grids, compatible with INGUN exchangeable kits for modular expansion
- Available for all standard exchangeable kits ATS MAxx
- Quick, easy mounting on moving plate
- Free overall height above the printed circuit board of 8 mm
- FR4 precision plates ground to a smooth finish
Exchangeable kit
ATS MA13/ESD
Item 46254-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
S-Line assembly kit, bottom
SBU-145-230-ATSMA11
Item 113312
- Precise, reliable contacting in small grids
- Quick, easy installation
- Extensive, detailed customisation guidelines
- Plate material is deflection-resistant FR4
Rigid pin cover
SNH-481-274-ATSMA14
Item 109256-KIT
- Expansion kit for rigid pin units
- Available for all standard exchangeable kits ATS MAxx
- Quick, easy mounting on pressure frame plate
- Free overall height above the printed circuit board of 58 mm
Exchangeable kit
ATS MA09/S-5/ESD
Item 46233-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
S-Line assembly kit, bottom
SBU-145-160-WL-ATSMA09
Item 113306
- Precise, reliable contacting in small grids
- Quick, easy installation
- Extensive, detailed customisation guidelines
- Plate material is deflection-resistant FR4
INGUN SELECTION
Exchangeable kit
ATS MA12/S-7
Item 45903-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
Exchangeable kit
ATS MA09
Item 45994-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
Exchangeable kit
ATS MA12/S-7/HF/AL/ESD
Item 154112
- Reliable, interference-free radio frequency contacting and measurement of radio frequency signals
- Outstanding shielding attenuation > 60 dB in the frequency range up to 6 GHz
- Radio-frequency and RF-compatible shielding from external and internal interference signals
- Safe to use in MA xxxx basic units
- Quick, tool-free set-up - ready for use without readjustment
Exchangeable kit
ATS MA14/HF/AL/ESD
Item 154014
- Reliable, interference-free radio frequency contacting and measurement of radio frequency signals
- Outstanding shielding attenuation > 60 dB in the frequency range up to 6 GHz
- Radio-frequency and RF-compatible shielding from external and internal interference signals
- Safe to use in MA xxxx basic units
- Quick, tool-free set-up - ready for use without readjustment
Exchangeable kit
ATS MA11/ESD
Item 46248-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
S-Line assembly kit, bottom
SBU-145-160-ATSMA09
Item 113305
- Precise, reliable contacting in small grids
- Quick, easy installation
- Extensive, detailed customisation guidelines
- Plate material is deflection-resistant FR4
Exchangeable kit
ATS MA14/S-10
Item 45983-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
INGUN SELECTION
Exchangeable kit
ATS MA12/S-7/ESD
Item 46236-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
Rigid pin cover
SNH-086-204-ATSMA11
Item 109248-KIT
- Expansion kit for rigid pin units
- Available for all standard exchangeable kits ATS MAxx
- Quick, easy mounting on pressure frame plate
- Free overall height above the printed circuit board of 58 mm
INGUN SELECTION
Exchangeable kit
ATS MA13/S-10
Item 45908-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
Rigid pin unit
SNK-086-134-ATSMA09
Item 109207-KIT
- Rigid pin units for reliable contacting in small grids, compatible with INGUN exchangeable kits for modular expansion
- Available for all standard exchangeable kits ATS MAxx
- Quick, easy mounting on moving plate
- Free overall height above the printed circuit board of 8 mm
- FR4 precision plates ground to a smooth finish
Exchangeable kit
ATS MA12/S-7/CRS
Item 108812
- Reliable ICT/FCT tests in the fully automated inline test system and in the manual test fixture
- Replacement kit for CRS test system SMART-Inline, IPS 19-2 and manual test fixture MA 2112, MA 3212
- Modularly configurable signal transmission with internal interfaces
- Quick, tool-free set-up, can be used without readjustment
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Designed for tooling pins with head length = 16 mm (FS-X,XX-RD-16-02)
Exchangeable kit
ATS MA09/ESD
Item 46245-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
INGUN SELECTION
Exchangeable kit
ATS MA350
Item 46480-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard and ESD versions, without internal interface
- Signal transmission using VG multipoint connectors for individual configurations
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
Exchangeable kit
ATS MA260/ESD
Item 41225-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard and ESD versions, without internal interface
- Signal transmission using VG multipoint connectors for individual configurations
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
S-Line assembly kit, bottom
SBU-285-230-WL-ATSMA12
Item 113151
- Precise, reliable contacting in small grids
- Quick, easy installation
- Extensive, detailed customisation guidelines
- Plate material is deflection-resistant FR4
Exchangeable kit
ATS MA13/HF/AL/ESD
Item 154013
- Reliable, interference-free radio frequency contacting and measurement of radio frequency signals
- Outstanding shielding attenuation > 60 dB in the frequency range up to 6 GHz
- Radio-frequency and RF-compatible shielding from external and internal interference signals
- Safe to use in MA xxxx basic units
- Quick, tool-free set-up - ready for use without readjustment
S-Line assembly kit, bottom
SBU-540-300-WL-ATSMA14
Item 113330
- Precise, reliable contacting in small grids
- Quick, easy installation
- Extensive, detailed customisation guidelines
- Plate material is deflection-resistant FR4
Exchangeable kit
ATS MA360/ESD
Item 46200-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard and ESD versions, without internal interface
- Signal transmission using VG multipoint connectors for individual configurations
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
Rigid pin cover
SNH-381-274-ATSMA13
Item 109252-KIT
- Expansion kit for rigid pin units
- Available for all standard exchangeable kits ATS MAxx
- Quick, easy mounting on pressure frame plate
- Free overall height above the printed circuit board of 58 mm
Exchangeable kit
ATS MA12/HF/AL/ESD
Item 154012
- Reliable, interference-free radio frequency contacting and measurement of radio frequency signals
- Outstanding shielding attenuation > 60 dB in the frequency range up to 6 GHz
- Radio-frequency and RF-compatible shielding from external and internal interference signals
- Safe to use in MA xxxx basic units
- Quick, tool-free set-up - ready for use without readjustment
S-Line assembly kit, bottom
SBU-440-300-WL-ATSMA13
Item 113323
- Precise, reliable contacting in small grids
- Quick, easy installation
- Extensive, detailed customisation guidelines
- Plate material is deflection-resistant FR4
Exchangeable kit
ATS MA14/S-10/ESD
Item 46242-KIT
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)
Rigid pin unit
SNK-226-204-ATSMA12
Item 108791-KIT
- Rigid pin units for reliable contacting in small grids, compatible with INGUN exchangeable kits for modular expansion
- Available for all standard exchangeable kits ATS MAxx
- Quick, easy mounting on moving plate
- Free overall height above the printed circuit board of 8 mm
- FR4 precision plates ground to a smooth finish
Exchangeable kit
ATS MA13/S-10/KONRAD
Item 59640
- Quick, tool-free set-up, can be used without readjustment
- Available in standard, ESD, and RF versions, with or without internal interface
- Modularly configurable signal transmission with internal interfaces
- Pressure plate unit and probe plate unit can be screwed together with stacking screws to form a unit with protected probe field
- Robust, durable design
- Can be customised using functional units for individual configurations
- Detailed accompanying documents (e.g., customising guidelines)