SELECT APPLICATION:
More information about INGUN Selection.
SELECT PRODUCT CATEGORY:
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Customising accessories
77 Product series
INGUN SELECTION
Interface block
SB-HS
- Type High-current block
- Version Device under test (DUT) side
- Connection Solder cup
- Accessory type Customising accessories
INGUN SELECTION
Interface block
SB-SI
- Type Signal block
- Version Device under test (DUT) side
- Connection Solder cup
- Accessory type Customising accessories
INGUN SELECTION
PCB support pin
PAS
- Type DUT support (round)
- Version Suitable for ESD-protected zone
- Tip diameter 3 mm [.118 in] – 5 mm [.196 in]
- Accessory type Customising accessories
INGUN SELECTION
Board marker probe
ME-P
- Version Pneumatic
- Marking type Circle
- Accessory type Customising accessories
- Surface material Hard / soft
INGUN SELECTION
Interface block
SB-HF
- Type Radio-frequency block
- Version Device under test (DUT) side
- Connection SE-EF316D-0015
- Accessory type Customising accessories
INGUN SELECTION
Interface block
SB-PN
- Type Pneumatic block
- Version Device under test (DUT) side
- Connection PDS-4-075-PUN
- Accessory type Customising accessories
INGUN SELECTION
RF transfer
HF-U
- Type RF transfer
- Version BNC plug connector
- Connection 1/2-28 UNEF
- Accessory type Customising accessories
INGUN SELECTION
Side approach mechanism
SAM-M
- Max. torque 1.5 Nm [13.2 lbf·in] – 3 Nm [26.5 lbf·in]
- Accessory type Customising accessories
- Max. contact stroke 14 mm [.551 in] – 20 mm [.787 in]
- Max. lever arm length 60 mm [2.36 in] – 200 mm [7.87 in]
INGUN SELECTION
Push rod
NHS-ST
- Type Rigid
- Thread M3x5,5 mm
- Version ESD
- Tip diameter 2.5 mm [.098 in] – 6 mm [.236 in]
INGUN SELECTION
Board marker probe
ME-E
- Version Electrical
- Marking type Circle
- Accessory type Customising accessories
- Surface material Hard / soft
INGUN SELECTION
Interface block
SB-MB
- Type Mixing block
- Version Device under test (DUT) side
- Connection Solder cup/plug nipple
- Accessory type Customising accessories
INGUN SELECTION
NanoVTEP Gen 2 barrel & clip
OTC
- Type Digitaltest opens test
- Version Frame Scan FX 2.0
- Accessory type Customising accessories
INGUN SELECTION
INGUN SELECTION
Pre-centering pin
VZ
- Type Pre-centring pin, round, eccentric
- Version ESD
- Accessory type Customising accessories
INGUN SELECTION
Side approach mechanism
SAM-H
- Max. torque 1.5 Nm [13.2 lbf·in]
- Accessory type Customising accessories
- Max. contact stroke 16 mm [.629 in] – 20 mm [.787 in]
- Max. lever arm length 60 mm [2.36 in]
INGUN SELECTION
Testjet SignalConditionerBoard
OTE
- Type Keysight Vectorless Test
- Version Escan multiplexer 16CH OpenPin
- Accessory type Customising accessories
Interface module
SSM
- Type VPC Mini Power module
- Version ITA 90 series
- Accessory type Customising accessories
Probe plate
KTP ATSMAxx/HF
- Type Radio-frequency exchangeable kit
- Version ESD
- Accessory type Customising accessories
RF absorber mat
HF-A
- Type RF absorber set
- Version RF exchangeable kit ATS MA11/HF
- Accessory type Customising accessories
- Useable area (WxD) 75 x 130 mm [2.95 x 5.11 in]
Adapter sleeve board marker
ADH
- Type Adpater sleeve
- Version Screw-on nut with stop
- Accessory type Customising accessories
Spring-loaded tooling pin
FS-GF
- Type Spring-loaded
- Version Round with collar (D6.5x6), probe plate (KTP)
- Tip diameter 3.98 mm [.156 in] – 8 mm [.314 in]
- Accessory type Customising accessories
Mechanic bending pin
MBS
- Type Bending pin
- Version Single-stage contacting
- Accessory type Additional function
Electric stroke counter
EHZ
- Type Mechanical counter - Hengstler
- Version 8-digit, LCD, electric reset
- Connection Screw terminal
- Accessory type Customising accessories