Downloads
Product information sheets
Product information "ME-P-S2,0-16-054-QS4"
- Compact, robust deisgn
- Precise, adjustable positioning
- Permanent marking of various materials
- Outstanding service life, highly resistant to wear
- Pneumatic drive system
| Accessory type: | Customising accessories |
|---|---|
| Approx. compression at working stroke: | 2 N [7.19 ozf] |
| Approx. engraver hardness: | 1600 HV |
| Approx. idle speed: | 27 U/min |
| Approx. marking Ø: | 2 mm [.078 in] |
| Compressed air connection: | QS-4 |
| Drive: | Compressed air motor |
| Engraver material: | Solid carbide |
| Lock nut width across flats: | 19 mm [.748 in] |
| MA exchangeable kits (ATS MA): | no name |
| Manual test fixtures (MA): | MA 20xx |
| Marking tip: | Cutting engraver |
| Marking type: | Circle |
| Max. filter gauge: | 0.04 mm [1.57 mil] |
| Max. temperature: | 80 °C [176 °F] |
| Maximum stroke (ME): | 3.5 mm [.137 in] |
| Min. normal rated flow: | 100 l/min [26.4 gal/min] |
| Min. temperature: | -30 °C [-22 °F] |
| Motor connection via: | Compressed air connection |
| Noise emission: | 90 dB measured at 1m intervals |
| Operating medium: | Compressed air filtered, without oiled compressed air |
| Operating pressure: | 6 bar [87 psi] |
| Outer dimensions (TxL): | 16 x 54 mm [.629 x 2.12 in] |
| Outer thread: | M16 x 1 |
| PA exchangeable kits (ATS PA): | ATS PAZxxx, ATS PAxxxx |
| Product group: | Board marker probes (ME) |
| Recommended marking impulse: | .5 – .1 s |
| Recommended working stroke: | 2 mm [.078 in] |
| RoHS-compliant: | Yes |
| Series: | ME-P |
| Surface material: | Hard / soft |
| VA exchangeable kits (ATS VA): | ATS VINxxx |
| Vacuum test fixtures (VA): | VA xxxx |
| Version: | Pneumatic |
| Weight: | 0.07 kg [.154 lbs] |
Login
Product Details
- Compact, robust deisgn
- Precise, adjustable positioning
- Permanent marking of various materials
- Outstanding service life, highly resistant to wear
- Pneumatic drive system
Other products in this series:
Technical data
Technical data
- Operating pressure: 6 bar [87 psi]
- Recommended marking impulse: .5 – .1 s
- Max. filter gauge: 0.04 mm [1.57 mil]
- Min. normal rated flow: 100 l/min [26.4 gal/min]
- Compressed air connection: QS-4
- Marking tip: Cutting engraver
- Motor connection via: Compressed air connection
- Operating medium: Compressed air filtered, without oiled compressed air
- Approx. compression at working stroke: 2 N [7.19 ozf]
- Noise emission: 90 dB measured at 1m intervals
- Approx. engraver hardness: 1600 HV
- Drive: Compressed air motor
- Engraver material: Solid carbide
- Maximum stroke (ME): 3.5 mm [.137 in]
- Approx. idle speed: 27 U/min
- Recommended working stroke: 2 mm [.078 in]
General data
- Max. temperature: 80 °C [176 °F]
- Weight: 0.07 kg [.154 lbs]
- Series: ME-P
- Accessory type: Customising accessories
- Outer dimensions (TxL): 16 x 54 mm [.629 x 2.12 in]
- Approx. marking Ø: 2 mm [.078 in]
- Version: Pneumatic
- Product group: Board marker probes (ME)
- Outer thread: M16 x 1
- RoHS-compliant: Yes
- Marking type: Circle
- Min. temperature: -30 °C [-22 °F]
- Lock nut width across flats: 19 mm [.748 in]
- Surface material: Hard / soft
Compatible with
- PA exchangeable kits (ATS PA): ATS PAxxxx
- Vacuum test fixtures (VA): VA xxxx
- PA exchangeable kits (ATS PA): ATS PAZxxx
- Manual test fixtures (MA): MA 20xx
- MA exchangeable kits (ATS MA): no name
- VA exchangeable kits (ATS VA): ATS VINxxx
Suitable tools and accessories
Loading...
Loading...
Loading...