Board marker probe ME-P-F1,0-16-054-QS4 Item 29483
Board marker probe ME-P-F1,0-16-054-QS4 Item 29483
Please log in to show the price
Login
The prices listed in the scale are displayed rounded, therefore deviation in the total price is possible.
Shipping costs
* The prices are rounded to two decimal places.
Technical data
Product group : | Board marker probes (ME) |
---|---|
Series : | ME-P |
Version : | Pneumatic |
Accessory type : | Customising accessory |
Outer dimensions (TxL) : | 16 x 54 mm |
Outer thread : | M16 x 1 |
Lock nut width across flats : | 19 mm |
Marking type : | Circle point |
Approx. marking Ø : | 1 mm |
Surface material : | Hard / soft |
Weight : | 0.07 kg |
Min. temperature : | - 30 °C |
Max. temperature : | + 80 °C |
RoHS-compliant : | RoHS-3;6c |
Recommended working stroke : | 2 mm |
---|---|
Recommended marking impulse : | 0.5 - 0.1 s |
Maximum stroke (ME) : | 3.5 mm |
Approx. compression at working stroke : | 2 N |
Operating pressure : | 6 bar |
Operating medium : | Compressed air filtered, without oiled compressed air |
Marking tip : | Milling engraver |
Engraver material : | Stainless steel, diamond plated |
Approx. engraver hardness : | 80 HRC |
Compressed air connection : | QS-4 |
Max. filter gauge : | 40 |
Min. normal rated flow : | 100 l/min |
Drive : | Compressed air motor |
Motor connection via : | Compressed air connection |
Approx. idle speed : | 27000 U/min |
Noise emission : | 90 dB measured at 1m intervals |
Manual test fixtures (MA) : | MA 20xx |
---|---|
Pneumatic test fixtures (PA) : | PA xxxx |
Vacuum test fixtures (VA) : | VA xxxx |
MA exchangeable kits (ATS MA) : | ATS MAxx/xxx |
VA exchangeable kits (ATS VA) : | ATS VINxxx |
PA exchangeable kits (ATS PA) : | ATS PAZxxx, ATS PAxxxx |