Receptacle A KS-112 46 M Item KS-11246M
Receptacle A KS-112 46 M Item KS-11246M
Please log in to show the price
Login
The prices listed in the scale are displayed rounded, therefore deviation in the total price is possible.
Shipping costs
* The prices are rounded to two decimal places.
Technical data
| Product group : | Receptacles (KS) |
|---|---|
| Series : | KS-112 |
| Sub-series : | KS-112 M screw-in version |
| Type of receptacle connection : | Wire-wrap |
| Press ring : | No |
| Surface area : | Gold |
| Collar diameter : | 2.2 mm |
| Collar height : | 0.2 mm |
| Wire-wrap post length : | 8.2 mm |
| Knurl : | No |
| Vacuum-tight : | No |
| RoHS-compliant : | RoHS-3;6c |
| Mounting hole in CEM1 : | 1.98 - 1.99 mm |
|---|---|
| Mounting hole in FR4 : | 1.98 - 1.99 mm |
| Total length : | 37.2 mm |
|---|---|
| Outer diameter : | 2 mm |
High-current probe
HSS-118 M
- Trusted high-current probes, optimally sized for current load capacity ratio
- Low-Ohm probe with Ri typical: < 10 mOhm
- For use in function and burn-in tests
- Large selection of tip styles and spring forces for optimum contact with DUT
- Secure hold in the receptacle thanks to the threaded connection
Spring-loaded test probe
GKS-112 MT
- Screw-in test probes for applications with possible vibrations or unwanted side and axial forces (migration of the test probe out of the receptacle is reliably prevented)
- The screw-in test probe is securely installed in the KS using a torque screwdriver and bit tool. The required screw-in torque is applied via a square post on the receptacle.
Step probe
T-912 M
- Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
- For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
- Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Spring-loaded test probe
GKS-112 M
- Screw-in test probes for applications with possible vibrations or unwanted side and axial forces (migration of the test probe out of the receptacle is reliably prevented)
- The screw-in test probe is securely installed in the KS using a torque screwdriver and bit tool. The required screw-in torque is applied via a square post on the receptacle.
- Stainless steel versions for temperatures from -100 °C up to +200 °C available
Step probe
T-112 M
- Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
- For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
