Screw-in tool BIT-T-888 M Item BIT-T-888M

Downloads
Conformation of RoHS compliance (EN|PDF)
CAD file (INGUN_BIT-T-888_M.STEP)
Product datasheet (EN|pdf)
Choose version
BIT-T-888 M (BIT-T-888M)
BIT-T-912 M (BIT-T-912M) BIT-T-113 M (BIT-T-113M) BIT-T-888 M-3 (BIT-T-888M-3) BIT-T-888 M (BIT-T-888M)
Here you can optionally configure a new variant:
Technical data
General data
Product group : Bit inserts (BIT)
Compatible test probe(s) / receptacle(s) : 039 T-888
Series : BIT-T
Tool for receptacle (KS) : No
Tool for test probe (GKS) : Yes
Test probe installation type : Screw-in
Max. tip diameter : 4.7 mm
Tool version : Rigid
Screw-in torque : 10 - 20 cNm
RoHS-compliant : RoHS-3
Step probe T-888 302 250 120 470A1502M Item T-888-0004
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 180 160 350A1502M Item T-888-0047
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 250 120 470A3002M Item T-888-0089
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 180 200 470A1502M Item T-888-0012
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 400 130 500A3002M Item T-888-0101
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 100 300 350A1502M Item T-888-0058
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 305 140 330 350A1502M Item T-888-0017
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 140 200 350A1502M Item T-888-0002
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 305 140 400 350A1502M Item T-888-0040
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 180 500 470A1502M Item T-888-0056
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 180 420 470A1502M Item T-888-0049
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 140 200 350A3002M Item T-888-0042
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 305 080 150 300A1502M Item T-888-0039
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 305 180 300 400A1502M Item T-888-0033
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 370 550 500A1502M Item T-888-0055
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 220 180 350A1502M Item T-888-0046
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 305 080 250 300A1502M Item T-888-0013
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 130 270 470A3002M Item T-888-0041
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 305 140 200 350A1502M Item T-888-0027
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 305 100 280 350A1502M Item T-888-0009
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 130 270 470A1502M Item T-888-0001
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 305 150 400 350A3002M Item T-888-0043
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 130 530 470A1502M Item T-888-0010
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 140 240 350A1502M Item T-888-0026
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 130 580 470A1502M Item T-888-0050
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 400 130 500A1502M Item T-888-0006
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 250 200 470A3002M Item T-888-0029
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 140 100 350A3002M Item T-888-0067
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 305 140 170 320A1502M Item T-888-0036
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 140 170 350A3002M Item T-888-0103
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 250 300 470A1502M Item T-888-0007
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 170 220 350A1502M Item T-888-0016
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 305 140 320 350A1502M Item T-888-0038
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 140 300 350A3002M Item T-888-0108
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 400 200 500A1502M Item T-888-0014
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 180 420 470A3002M Item T-888-0044
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 305 100 400 350A1502M Item T-888-0023
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 305 180 140 400A1502M Item T-888-0032
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 400 100 500A1502M Item T-888-0069
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 305 140 240 350A3002M Item T-888-0098
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 400 170 500A1502M Item T-888-0091
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 220 200 350A3002M Item T-888-0090
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 180 220 350A1502M Item T-888-0003
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 305 140 100 350A1502M Item T-888-0035
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 250 220 470A3002M Item T-888-0082
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 250 220 470A1502M Item T-888-0018
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 180 140 450A1502M Item T-888-0070
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 250 200 470A1502M Item T-888-0008
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 220 200 350A1502M Item T-888-0054
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 180 220 350A3002M Item T-888-0019
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 400 170 500A3002M Item T-888-0080
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 305 170 220 330A3002M Item T-888-0088
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 140 170 350A1502M Item T-888-0057
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 140 100 350A1502M Item T-888-0048
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 130 360 470A1502M Item T-888-0020
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 305 170 220 330A1502M Item T-888-0031
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 140 300 350A1502M Item T-888-0021
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 180 150 450A1502M Item T-888-0005
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 305 180 140 400A3002M Item T-888-0053
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 305 140 270 350A1502M Item T-888-0037
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 100 300 350A3002M Item T-888-0099
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 370 350 500A1502M Item T-888-0025
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 305 140 240 350A1502M Item T-888-0015
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 305 080 280 300A1502M Item T-888-0028
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 180 160 350A3002M Item T-888-0022
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 180 580 470A1502M Item T-888-0030
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 305 080 300 300A1502M Item T-888-0034
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 305 150 400 350A1502M Item T-888-0011
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool
Step probe T-888 302 130 300 470A1502M Item T-888-0065
  • Step probes are used to test the correct position of the contact terminals (contact lamellae) in the plug housings. A connection test can be carried out at the same time. Contact will only occur when the tip of the step probe is correctly positioned
  • For optimum contacting, various tip styles are available in various tip ø, disc ø and pin lengths
  • Version for test probes installed particularly close together: the screw-in torque is applied via the disc using a bit tool