INGUN pneumatic test fixture

Pneumatic
test fixtures
Testing with high contact force made easy

To the product finder

Pneumatic test fixtures from INGUN are especially suitable for contacting electronic units such as printed circuit boards (PCBs) with medium quantities (series testing) and a large number of versions. The test fixtures are designed as an interchangeable kit system, are connected to an existing test system and are operated with exchangeable kits that are specially designed for the electronic unit to be tested.

They boast the following features:
  • Interchangeable kit system
  • High contact force of up to 2,500 N
  • Increased ease of use, without significant clamping forces
  • Energy-saving opening mechanism
  • Basic unit including stiffener bars and circumferential finger guard
  • Individualised configuration of internal interface specific to application
  • Exchangeable kits available as standard and ESD versions, tool-free, and can be used without readjustment
  • Service life: 1,000,000 load cycles (under laboratory conditions)

Test fixtures available with either gear drive or cam disc

As standard, the test fixtures are equipped with safety switches for detecting whether the pressure frame is closed, and if stiffener bars and the circumferential finger guard are correctly positioned. The benefit of compressed air results in increased ease of use, without significant clamping forces for high contact forces.

 
 

Pneumatic test fixtures are available in two versions: the PAZ xxx series is pneumatically operated using gear wheel drive and the PA xxxx series are pneumatically operated using a cam disc. Both series are available as interchangeable test fixtures and are operated with an exchangeable kit that can be installed with little effort, and no need for tools or readjustment. The pressure frame plate, which can only be loosened and replaced with an open pressure frame unit, is held in place using four quick-release fasteners.

The parallel contact stroke is generated by adding compressed air to a pneumatically operated actuator that is used to actuate the gear wheel drive in the PAZ xxx series of test fixtures and the cam disc in the PA xxxx series of test fixtures via the lifting rod. The test fixtures are designed for extra-low voltage (PELV) and comply with protection class III. They do not have their own intrinsic control unit. The actuation of the pneumatic valves must be done by the customer.
Exchangeable kit ATS PA2130 Item 21117
  • Quick, tool-free set-up, can be used without readjustment
  • Available in standard and ESD versions, without internal interface
  • Signal transmission using VG multipoint connectors for individual configurations
Pneumatic test fixture PA 2130/D/H Item 20598
  • Pneumatic test fixture with parallel closing drive for testing medium PCB quantities
  • Robust, durable test fixture with cam disc
  • Standard and ESD exchangeable kits that can be exchanged quickly and without tools
  • Increased ease of use without significant closing forces
  • Rapid contacting movement
Pneumatic test fixture PAZ 215/D/H Item 18956
  • Pneumatic test fixture with parallel closing drive for testing medium PCB quantities
  • Robust, durable test fixture with gear wheel drive
  • Standard and ESD exchangeable kits that can be exchanged quickly and without tools
  • Increased ease of use without significant closing forces
  • Rapid contacting movement
Exchangeable kit ATS PAZ215 Item 18958
  • Quick, tool-free set-up, can be used without readjustment
  • Available in standard and ESD versions, with or without internal interface
  • Signal transmission using VG multipoint connectors or contact terminals for individual configurations
Pneumatic test fixture PAZ 400/D/H Item 28489
  • Pneumatic test fixture with parallel closing drive for testing medium PCB quantities
  • Robust, durable test fixture with gear wheel drive
  • Standard and ESD exchangeable kits that can be exchanged quickly and without tools
  • Increased ease of use without significant closing forces
  • Rapid contacting movement
Exchangeable kit ATS PAZ400 Item 28491
  • Quick, tool-free set-up, can be used without readjustment
  • Available in standard and ESD versions, with or without internal interface
  • Signal transmission using VG multipoint connectors or contact terminals for individual configurations